Sam4s ER-180U Series - Product Specifications; General Specification; System Specifications

SAM4S ER-180U SERIES 2-1
2 Product Specifications
Specifications are correct at the time of printing. Product specifications are subject to change without notice.
See below for product specifications.
2-1 General Specification
A. System Specifications
Item Description Remark
Processor
• NXP CPU LPC1519JBD100E,32-Bit,ARM Cortex-M3
Memory
• DATA
SRAM : 96KBytes (Serial-EEPROM)
• PGM
EEPROM : 256KBytes (CPU Internal)
Battery
• Type : MS Lithium, 3.0V 5.5mAh
• Part Name : MS621FE-FL11E
• Charging Time : 24 Hours
• Life : 2 Years
Rechargeable
Data Storage
• 90 Days
When battery is fully charged
Printer
• Model : LTP01-245-01 (SII)
• Print Speed : 65 mm/sec
• Type : Thermal dot line printing type
Detail Spec refers to next page
Display
• Operator Display : 8 Digits LED
• Customer Display : 8 Digits LED #Option
Keyboard
• Max. 48 Keys Raised-I (w/o cap)
• Max. 48 Keys Raised-II (with cap) #Option
Drawer
• B-type (3B4C, 4B4C)
• Bplus-type (3B4C, 4B4C) #Option
• G-type (5B5C, 4B8C, 5B8C) #Option
• Compulsory switch #Option
Consumption
• Max. : 11W Reg. : 7W
Power Requirement
• Adaptor DC7.5V/2.5A (Input : AC 100~240V / 50~60Hz)
Environment
Condition
• Temperature : 0 ℃ ~ 45℃
• humidity : 30% ~ 80% RH
Dimensions(mm)
• 420(L) X 325(W) X 202(H)
• 450(L) X 400(W) X 218(H)
With B-Drawer & Bplus Drawer
With G-Drawer (Option)
Weight
• 3.8Kg (SET only)
• 8.1Kg (SET only)
With B-Drawer & Bplus Drawer
With G-Drawer (Option)
Table2-1 General Specifications