Need help?Do you have a question about the Sam4s Gcube-100 and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Printing Method | Direct Thermal |
| Connectivity | USB, Serial, Ethernet |
| Type | Thermal Printer |
| Print Width | 72 mm |
| Paper Width | 80 mm |
| Print Resolution | 203 DPI |
| Resolution | 8 dots/mm (203 dpi) |
| Interface | USB, Serial, Ethernet |
| Paper Type | Thermal Paper |
| Paper Roll Diameter | 83 mm |
| Auto Cutter | Yes |
Details the items included in the printer box and how to check for damage or missing parts.
Explains how to connect up to three cables to the printer's connector panel.
Instructions for plugging the interface cable securely into the printer and host device.
Guidance on connecting the cash drawer cable to the printer's kick-out connector.
Steps for safely connecting the printer to the power source, including voltage checks.
Covers wall mount installation and the procedure for installing a new paper roll.
Information on changing printer settings using the NFC APP, including installation steps.
Overview of the printer's control panel, buttons, and panel lights (FND).
Guide on adjusting the sensitivity settings for the paper near-end sensor.
Instructions for cleaning the printer head to maintain print quality.
Explanation of error indicators on the FND and their corresponding solutions.
Detailed specifications for the printer, including printing and paper details.
To Next Page
