Need help?Do you have a question about the Sam4s GIANT-100 and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Print Speed | 250 mm/sec |
| Resolution | 180 dpi |
| Paper Width | 80 mm |
| Cutter | Auto Cutter |
| Interface | USB, Serial, Ethernet |
| Paper Roll Diameter | 83 mm |
| Weight | Approx. 1.6Kg |
Provides an overview of the document's scope, covering installation, uninstallation, and configuration of SAM4S printers.
Details the compatible operating systems and software prerequisites for installing and using the SAM4S printer driver.
Outlines essential steps and checks before commencing the SAM4S printer driver installation process.
Explains how to perform a self-test to identify the printer's interface type before installation.
Step-by-step guide for installing the SAM4S printer using a serial connection, including port configuration.
Step-by-step guide for installing the SAM4S printer using a parallel connection, including port selection.
Detailed instructions for installing the SAM4S printer via USB connection, including security prompts.
Guide for installing the USB to Serial adapter driver on Windows 7 for SAM4S printers.
Guide for installing the USB to Serial adapter driver on Windows 10 for SAM4S printers.
Instructions for installing the SAM4S printer using an Ethernet connection, including TCP/IP configuration.
Describes how to check if the SAM4S printer has been successfully installed and configured in Windows.
Provides step-by-step instructions for removing SAM4S printer drivers and software from the system.
Details the files and registry entries that may remain on the system after uninstalling SAM4S printer drivers.
Lists and describes the various built-in fonts supported by SAM4S printers, including character sets and sizes.
Specifies the supported print resolutions and a comprehensive list of paper sizes compatible with SAM4S printers.
Explains how to set the print direction (portrait/landscape) and rotation for SAM4S printer output.
Details the various paper feed and cut options available for SAM4S printers, including custom settings.
Describes the dithering algorithms and options available to improve image quality during printing.
Guides users on adding, modifying, and deleting custom paper sizes for SAM4S printers.
Explains how to use special commands for device control, such as cash drawer operations, at document/page boundaries.
Covers the supported barcode types, options for width, height, HRI position, and testing.
Introduces advanced configuration options including logo setup, sample printing, and user-specific print/peripheral settings.
Addresses common issues encountered during printer installation, such as missing ports or unrecognized devices.
Provides solutions for problems encountered when trying to uninstall SAM4S printers or their drivers.
Offers guidance on resolving common printing problems, like incorrect paper cutting or print processor errors.
To Next Page
