Need help?Do you have a question about the Sam4s ELLIX 20 and is the answer not in the manual?
General| Type | Thermal Printer |
|---|---|
| Printing Method | Direct Thermal |
| Auto Cutter | Yes |
| Print Speed | 200 mm/s |
| Print Width | 72 mm |
| Resolution | 203 dpi |
| Paper Width | 80 mm |
| Paper Roll Diameter | 83 mm |
| Interface | USB, Serial, Ethernet |
| Power Supply | AC Adapter |
Details on how to unpack the printer and its accessories.
Instructions for connecting various cables to the printer.
Steps for connecting the printer to a computer via an interface cable.
Guide on how to connect a cash drawer to the printer.
Instructions for connecting the printer's power supply unit.
Procedures for installing a new paper roll or replacing an existing one.
Guide for installing a partition for 58mm paper printing.
Instructions on how to mount the printer on a wall.
Step-by-step guide for inserting and loading the paper roll.
Overview of printer settings and adjustments available to users.
Details on DIP switch settings for serial interface configuration.
Details on DIP switch settings for parallel interface configuration.
Information on basic printer operation and control panel functions.
Explanation of the printer's control panel buttons and indicator lights.
Displays ASCII codes for various international character sets supported by the printer.
Lists and explains control commands for EPSON mode operation.
Lists and explains control commands for STAR mode operation.
Contains various notes and tips related to printer operation and maintenance.
Important considerations for printing quality and paper feeding behavior.
Information on performing two-color printing using specific paper.
Procedure for resolving auto cutter lock-up errors.
Guide on how to clean the printer head to maintain print quality.
Detailed pin assignments for serial and parallel interface connectors.
Pinout details for the cash drawer connector.
Explains the different error conditions indicated by LEDs and the buzzer.
Instructions for adjusting the near-end paper sensor sensitivity.
Technical specifications for the printer's general characteristics.
Details on the recommended paper types and dimensions for the printer.
To Next Page
