- 51 -
H. Specification
H.1 General Printer specification
Printing method Thermal line printing
Dot density 180 dpi
Printing width 72 mm
Paper width 80 mm
Characters per line (default)
42 (Font A)
56 (Font B)
Printing speed
52 lines/sec
220 mm/sec
Receive Buffer Size 4 Kbytes
NOTE : Printing speed may be slower, depending on the data transmission speed and
the combination of control commands.
Input voltage 100 ~ 240V AC
Frequency 50 ~ 60 Hz
Supply voltage
Output voltage +24V DC
Temperature
5 ~ 45 (Operating)
-10 ~ 50 (Storage)
Environmental
conditions
Humidity
10 ~ 90 % RH
; except the paper roll.
Printer
70,000,000 lines
TPH
1x10
8
pulse
(Approximately 100 Km)
MCBF
Mechanical
Cutter
1,500,000 Cut
To Next Page
Loading...
