- 11 -
1-6-3. Paper Roll Installation
1. Open the paper roll cover by pressing the cover-open button.
2. Remove the used paper roll core if there is one.
3. Insert the paper roll as shown.
4. Be sure to note the correct direction that the paper comes off the roll.
5. Pull out a small amount of paper, as shown. Then close the cover.
6. Tear off the paper as shown.
NOTES : Be sure to use paper rolls that meet the specifications. Do
not use paper rolls that have the paper glued to the core
because the printer cannot detect the paper end correctly.
To Next Page
Loading...
