4-2 EB 5866 EN
Shipment and on-site transport
4.4 Storing the valve
Risk of valve damage due to improper
storage.
Î Observe the storage instructions.
Î Avoid long storage times.
Î Contact SAMSON in case of different
storage conditions or long storage peri-
ods.
Storage instructions
− The control valves can be stored horizon-
tally. Secure the valve in the stored posi-
tion against slipping or tipping over.
− Protect the control valve against external
inuences (e.g. impact).
− Protect the control valve against moisture
and dirt. Store it at a relative humidity of
less than 75%. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe the permissible storage tem-
perature from –20 to +65°C.
− Do not place any objects on the control
valve.
We recommend regularly checking the con-
trol valve and the prevailing storage condi-
tions during long storage periods.
Special storage instructions for elastomers
Elastomer, e.g. actuator diaphragm
(Type2780 Pneumatic Actuator)
− To keep elastomers in shape and to
prevent cracking, do not bend them or
hang them up.
− We recommend a storage temperature of
15°C (59°F) for elastomers.
− Store elastomers away from lubricants,
chemicals, solutions and fuels.
SAMSON's After-sales Service can provide
more detailed storage instructions on re-
quest.
NOTICE
!
NOTICE
!
Note
Tip
To Next Page
Loading...
