Samson 3510 - 2 Markings on the Control Valve; Body Inscription

10 EB 8091-1 EN
Markings on the control valve
NOTICE
!
Risk of valve damage due to the use of unsuitable tools.
Certain tools are required to work on the valve.
Î Only use tools approved by SAMSON (uAB0100).
Risk of valve damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the valve material. Unsuitable lubricants may cor-
rode and damage the valve surface.
Î Only use lubricants approved by SAMSON (uAB0100).
2 Markings on the control valve
2.1 Body inscription
SAMSON 3510
1 2
4
6
5
3
8
7
Fig.1: Body inscription
1 Valve size:
DIN: DN · ANSI: NPS· JIS: DN…A/B
2 Pressure rating:
DIN: PN · ANSI: CL · JIS: K
3 Flange/end connection type
4 Material
5 Order number and position number in the order
For after-sales service orders: AA prex
6 Heat number
7 Month and year associated with EAC symbol
8 PED (Pressure Equipment Directive), "Art. 4, Abs. 3"
ID of the notied body, uid group, and category