English - 47
Clearing Scrambled Channels - Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed.
This process may take up to 20-30 minutes.
1 Press the MENU button.
Press the or button to select Channel, then press the ENTER button.
Press the or button to select Clear Scrambled Channel, then press the
ENTER button. It searches scrambled channels, which are to be removed from
the list.
To stop searching scrambled channels;
Press the ENTER button to select Stop.
Press the button to select Yes, then press the ENTER button.
2 When the scrambled channel searching is completed, press the ENTER button.
Press the EXIT button to exit.
®
This function is only available in Cable mode.
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1 Press the MENU button to display the menu.
Press the or button to select Channel, then press the ENTER button.
2 Press the or button to select Fine Tune, then press the ENTER button.
3 Press the or button to adjust the fine tuning.
To store the ne tuning setting in the TV’s memory, press the ENTER
button.
®
If you do not store the fine-tuned channel in memory, adjustments are not
saved.
4 To reset the fine tuning setting, press the button to select Reset, then press
the ENTER button.
Press the EXIT button to exit.
®
Only analog TV channels can be fine tuned.
®
“
*
” will appear next to the number of fine-tuned channels.
Channel
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Clear Scrambled Channel
Removing scrambled channel.
Stop
ReturnEnter
DTV Cable 122
3%
Fine Tune
Air 6
0
Reset
Save
Return
Adjust
Move
Channel
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Fine Tune
Air 6
+5
Reset
Save
Return
Adjust
Move
Fine Tune
Air 6* Fine Tuned
+5
Reset
Save
Return
Adjust
Move
Fine Tune
Air 6 Fine Tuned
+5
Reset
Enter
Return
Move
To Next Page
Loading...
Need help?
General
