Samsung 6100 Series - Power Issues; Unwanted Powering Off

Unwanted Powering
Off
Trouble
Powering
On
Stand Assembly
Cannot
Find a
Channel
If
your
Samsung
1V
appears
to
turn off by
itself, the
re
may
be
an issue
with either your Timer settings
or
your Eco
friendly
No
Signal
Power
Off
feature.
First make sure
Sleep
Timer
is
not
accidentally
set. The
Sleep
Timer
turns off the
1V
automatically
after a certain period
of
time has passed.
• Sleep
Timer: User Menu
-
System
-
Time
- Sleep
Timer
If
the
Sleep Timer
is
not activated, you may have engaged the
No
Signal
Power
Off
or
Auto Power Off
feature.
•
No
Signal
Power
Off:
User Menu
-
System
-
Eco Solution - No
Signal Power
Off
•
Auto Power
Off:
User Menu
-
System
- Eco Solution -
Auto
Power
Off
Before you turn the TV on, find the red
light
on
the right or
left
bottom of your
TV.
Press the Power
on
button on the TV or remote.
The
light should blink about 5 times before the
TV
turns on.
If
you find that you are having
trouble
powering on your
Samsung
television,
the
re
are a number
of
things
to
check before making a
call
to
the service department.
If
you're sure your
power
cord, remote
control,
and
PC
are functioning
properly,
you may be having a
cable
issue.
If
you have a
cable
or
satellite
box, your
1V
may appear
to
be off because the
cable
or
satellite
box
is
not outputting a
signal.
To
test the
signal
output of your
cable
or
satellite
box, press the guide or info button on the
cable
or satellite
box remote
control. If the screen displays
the guide or info data, the
problem
is
caused by the box.
If
you have any
trouble assembling
the stand first, review
"Install
the
Stand"
in
the paper
manual.
Re
-
run
Setup
(Go
to
User Menu
-
System
-
Setup)
or
run Auto
Program. (Go
to
User Menu - Channel -
Auto Program).
~
For
detailed
troubleshooting information, watch the troubleshooting videos at www.samsung.com/
spsn.