Samsung 6100 Series - TV Not Turning On or Displaying Video

The TV
won't
turn on.
There
is
no picture/video.
•
Make sure the
AC
power cord
is
securely plugged
in
to
the
wall outlet
and the
TV.
•
Make
sure the
wall outlet
is
working.
•
Try
pressing the
C)
button on the TV to make sure the problem
is
not
the remote.
If
the TV turns on, refer to
"Remote control
does not
work"
below.
•
Check the
cable
connections. Remove and
re
connect
all
cables
connected to
the TV and
external
devices.
• Set the video outputs
of
your
external
devices
(Cable/Sat
Box,
DVD
,
Blu-ray
etc) to match the TV's input connections. For
example,
if
an
external
device
's
output
is
HDMI,
it
should
be connected to an
HDMI
input
on the
TV.
•
Make sure your connected devices are powered on.
•
Be sure
to
select the correct input source
•
Reboot the connected device by
unplugging
it, and then reconnecting
the device
's
power
cable.
The remote
control does not
• Replace the remote
control
batteries. Make sure the batteries are
work. installed with their
poles(+/-)
in
the correct direction.
The
cable/set
top box remote
control
doesn't turn the TV on
or off, or adjust the
volume.
• Clean
the sensor's transmission window on the remote.
•
Try
pointing the remote
directly
at the TV from 5- 6
feet
away.
• Program the
Cable/Set
remote
control
to
operate the
TV.
Refer to the
Cable/Set-Top-Box user
manual
for the SAMSUNG TV code.
~
This TFT LED
panel uses a panel
co
nsisting
of
sub pixels which require sophisticated technology
to
produce. There may be, however, a few bright or dark
pixels
on the screen. These
pixels will
have no
impact on the performance of the product.
~
To keep your TV
in
optimum conditio
n,
upgrade to the latest
firmware on the Samsung web site by
USB (samsung.com
-->
Support
-->
Downloads).