Troubleshooting
Samsung Electronics 4-11
■Settingoutdoorunitoptionswitchandaddressmanually
▶
Setting the option
• Press and hold K2 to enter the option setting.
(Only available when the operation is stopped)
– If you enter the option setting, display will show the following.
E
xample)
Example)
– Seg 1 and Seg 2 will display the number for selected option.
– Seg 3 and Seg 4 will display the number for set value of the selected option.
•
If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and change the function
for the selected option
•
If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and change the function
for the selected option.
•
After selecting the function for options, press and hold the K2 switch for 2 seconds. Edited value of the option will be saved when
entire segments blinks and tracking mode begins.
To Next Page
Loading...
