Troubleshooting
4-12 Samsung Electronics
Option item Input unit SEG1 SEG2 SEG3 SEG4 Function
Channel address Main 0 0
A U
Automatic setting
(Factorydefault)
0
0 ~ 15 manual setting
Snow accumulation
prevention control
Main 0 1
0 0 Disabled (Factory default)
0 1 Enabled
Step for
Silence mode
Main 0 2
0 0 Disabled (Factory default)
0 1 Step1
0 2 Step2
0 3 Step3
Type of
Silence mode
Main 0 3
0 0
Automatic Silence mode
(Factory default)
0 1 Manual Silence mode
Edited option will not be saved if you do not end the option setting as explained in above instruction.
•
While you are setting the option, you may press and hold the K1 button to reset the value to previous setting.
•
If you want to restore the setting to factory default, press and hold the K4 button while you are in the
option setting mode.
– If you press and hold the K4 button, setting will be restored to factory default but it doesn't mean that
restored setting is saved.Press and hold the K2 button. When the segments shows that tracking mode is in
progress, setting will be saved.
To Next Page
Loading...
Need help?
General
