ENGLISH-65
03 INSTALLATION
How to download to a microSD card
1. Download the wired remote controller image, change the le name to “IMAGE.BIN,” and then download to microSD Card.
2. Download the wired remote controller program, change the le name to “MICOM.BIN,” and then download to microSD
Card.
3. Insert the microSD Card with the Wired Remote Controller active, and then reset the system.
For system reset, press the and buttons at the same time for more than 5seconds.
4. The download to microSD Card is performed as follows:
Download proceeds in the order of IMAGE and MICOM.
When the update fails, the Wired Remote Controller is reset automatically and the update proceeds again.
5. When the download is nished, tracking starts automatically.
When tracking is completed, remove the microSD Card.
• Be sure to use the microSD Card after formatting in FAT16 or FAT32.
• The microSD Card supports the SD or SDHC with the capacity of 1GB to 32GB.
• The update is performed only when the le version in the microSD Card diers from the one of the Wired
Remote Controller.
• When the screen is frozen for more than 3minutes after completing the microSD card update by 100%, product
inspection is required.
• Delete the les except for the ones for download. (Only IMAGE.BIN and MICOM.BIN are required.)
CAUTION
To Next Page
Loading...
Need help?
General