SmartThings app
26
English
How to use
How to use
Checking the power connections
Check if the power is connected to the product and
the access point.
Setting up and connecting to a Wi-Fi
access point using your smartphone
1 To connect the product to a Wi-Fi network,
turn on Wi-Fi at "Settings > Wi-Fi", and then
select the access point to connect to
• Only alphanumeric characters are supported for
wireless access point names (SSIDs). If an SSID has a
special character, rename it before connecting to it.
• This product supports only Wi-Fi 2.4 GHz.
On
Select
2 Turning off "Switch to mobile data" at
"Settings > Wi-Fi" on your Smartphone
• If "Switch to mobile data" or "Adaptive Wi-Fi" is
turned on, you cannot connect to the network.
Be sure to turn off these functions before
connecting to the network.
Advanced
Switch to mobile data
Insert SIM card to use mobile data.
Advanced
Off
Off
NOTE
• The setup may differ depending on your
smartphone model, OS version and manufacturer.
3 Checking the Internet connectivity
• After connecting to Wi-Fi, check that your
smartphone is connected to the Internet.
NOTE
• A firewall may prevent your smartphone from connecting
to the Internet. Contact your Internet service provider for
troubleshooting.
Downloading the SmartThings app and
registering your Samsung account
1 Downloading the SmartThings app
• Search for "SmartThings" on the Play Store or App Store and
download the SmartThings app to your smartphone.
• If the SmartThings app is already installed on your smartphone,
update it to the latest version.
NOTE
• The SmartThings app supports Android OS 7.0 or later (with at
least 2 GB RAM) and iOS 12.0 or later. The app is optimized for
iPhone 6s or later and Samsung smartphones (Galaxy S and
Note series).
The updates of the SmartThings app or the functions supported
by it may be discontinued for the previously supported OS
versions due to reasons such as usability and security.
• The SmartThings app may change without prior notice to
improve product usability and performance.
To use the SmartThings app, connect the product to the network in the sequence described below.
The images shown may differ depending on your smartphone model, OS version and manufacturer.
You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the
product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE, 5G or more wireless networks.
You can easily install the SmartThings app or use the product with your smartphone by scanning the
SmartThings QR code on the label.
SmartThings app
To Next Page
Loading...
