SmartThings app
28
English
How to use
• If a failure message appears while adding a device,
see "Setting up and connecting to a Wi-Fi access
point using your smartphone" on page 26. The
connection may fail temporarily due to an installation
location problem of the access point or other problems.
• If a message appears on the SmartThings app, follow its
instructions.
NOTE
• For the security protocols for wireless/wired access points,
WPA-PSK and WPA2-PSK are recommended. For the
authentication methods, AES is recommended. New Wi-Fi
authentication specifications and Wi-Fi non-standard
authentication methods are not supported.
• The product supports the IEEE802.11 b/g/n (2.4 GHz)
communication protocol. (Samsung recommends
IEEE802.11n.)
• If your Internet service provider permanently has
registered the MAC address (a unique identification
number) of your PC or modem, you may not be able
to connect your product to the Internet. Contact your
Internet service provider and ask how to connect
devices other than your PC (such as an air conditioner
and an air purifier) to the Internet.
Open Source Announcement
The software included in this product contains open source
software.
The following URL http://opensource.samsung.com/
opensource/SMART_TP1_0/seq/0 leads to open source
license information as related to this product.
To Next Page
Loading...
