55
English
Installation manual
Steps Remote control display
b. Set the SEG20 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in the following
order:
SEG20
16 Press the (Mode) button. Fan and Off appear on the remote control display.
17 Set the SEG21 and SEG22 values:
a Set the SEG21 value by pressing the (Low Fan) button repeatedly until the value
you want to set appears on the remote control display.
SEG21
b. Set the SEG22 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in the following
order:
SEG22
18 Press the (Mode) button. Heat and Off appear on the remote control display.
19 Set the SEG23 and SEG24 values:
a Set the SEG23 value by pressing the (Low Fan) button repeatedly until the value
you want to set appears on the remote control display.
SEG23
b. Set the SEG24 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in the following
order:
SEG24
To Next Page
Loading...
