Setting indoor unit addresses and installation option
62
English
Installation manual
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Explanation PAGE
Individual control of a
remote controller
Heating setting compensation / Removing
condensate water in heating mode
Adjusted EEV step of
stopped unit during
oil return /defrost
mode.
- -
Indication
and Details
Indication Details Indication Details Indication
Details
Indication Details
- -
Heating Setting
Compensation
Removing
Condensate
Water in Heating
Mode
3
0 or 1 channel 1
0 Default Disuse
0 Default
1 2 °C Disuse
2 channel 2
2 5 °C Disuse
3 Default Use (*7)
3 channel 3
4 2 °C Use (*7)
1
Adjusted
EEV
positon
4 channel 4
5 5 °C Use (*7)
* Advanced function: Controlling cooling/heating current or power saving with motion detect.
(*1) When Cooling or dry mode is off. The indoor fan operate in setting minutes.
(*2) Minimizing fan operation when thermostat is off
- Fan operates for 20 seconds at an interval of 5 minutes in Heat mode.
- Fan stops or operates Ultra low in Cooling when thermostat is off.
(*3)
Cooling only indoor unit: To use this option, install the Mode Select switch(MCM-C200) on the outdoor unit and fix it as
Cool mode.
To Next Page
Loading...
