How to fix Samsung Blu-ray Player remote control not working?
If your Samsung Blu-ray Player remote control isn't working, try these steps: First, replace the batteries. If that doesn't work, make sure you're within 6.1 meters (about 20 feet) of the player. As a last resort, remove the batteries, press and hold any button for a few minutes to reset the remote's microprocessor, then reinstall the batteries and try again.
How to fix no audio on Samsung BD-F7500?
If you have no audio on your Samsung Blu-ray Player, make sure you have selected the correct Digital Output in the Audio Options Menu.
What to do if Samsung BD-F7500 Blu-ray Player disc does not play?
If your Samsung Blu-ray Player isn't playing a disc, make sure the disc is installed with the label side facing up. Also, check the region number of the Blu-ray Disc/DVD to ensure it's compatible.
How to troubleshoot no HDMI output on a Samsung Blu-ray Player?
If you're getting no HDMI output on your Samsung Blu-ray Player, first check the connection between the TV and the player's HDMI jack. Also, verify that your TV supports the HDMI input resolution (480p, 720p, 1080i, or 1080p).
Why is the screen blank on my Samsung Blu-ray Player and how to fix it?
If your Samsung Blu-ray Player's screen is blank, it might be due to the HDMI output being set to a resolution your TV doesn't support (e.g., 1080p). To fix this, press the @ button on the top panel for more than 5 seconds with no disc inside. This will revert all settings to the factory defaults. Note that all stored user BD data will be deleted.
How to reset a forgotten password on Samsung BD-F7500?
If you forgot your password, press the @ button on the top panel for more than 5 seconds without a disc inside. This will revert all settings, including the password, to the factory defaults. Note that all stored user BD data will be deleted.
What to do if the Samsung BD-F7500 remote control is not working?
If your Samsung Blu-ray Player's remote control isn't working, first check the batteries and replace them if needed. Ensure you're within 20 feet of the player when using the remote. If problems persist, try resetting the remote by removing the batteries, holding down one or more buttons for several minutes, then reinstalling the batteries.
Why is my Samsung BD-F7500 Blu-ray Player remote control not working?
If the remote control for your Samsung Blu-ray Player isn't working, try the following: * Check and replace the batteries. * Ensure you are within 6.1 meters (20 feet) of the player. * Reset the remote by removing the batteries, holding down one or more buttons for several minutes, then reinstalling the batteries.
Why is there no HDMI output from my Samsung Blu-ray Player?
If your Samsung Blu-ray Player isn't displaying HDMI output, verify the connection between your TV and the player's HDMI jack. Also, confirm that your TV supports the HDMI input resolution being output by the player (576p/480p, 720p, 1080i, 1080p, or 2160p).
How to reset forgotten password on Samsung BD-F7500?
If you've forgotten the password for your Samsung Blu-ray Player, you can reset it by pressing and holding the power (@) button on the top panel for more than 5 seconds while there is no disc inside. This will revert all settings, including the password, to the factory defaults. Note that this will also delete all stored user BD data, so use this method only if absolutely necessary.
General| 3D | Yes |
|---|---|
| Depth | 45.9 mm |
| Width | 430 mm |
| Height | 201 mm |
| Weight | 1700 g |
| Display | VFD |
| Package depth | 471 mm |
| Package width | 290 mm |
| Product color | Black |
| Package height | 92 mm |
| Package weight | 2300 g |
| AC input voltage | 100 - 240 V |
| Composite video in | 0 |
| Disc types supported | BD, BD-R, BD-R DL, BD-R XL, BD-RE, BD-RE DL, BD-RE XL, BD-ROM, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Playback disc formats | Blu-Ray audio, Blu-Ray video, CD audio, CD video, VCD |
| Supported video modes | 1080p |
| Card reader integrated | - |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | AAC, AAC+, MP3, WAV, WMA |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Image formats supported | JPG |
| Video formats supported | AVCHD, DIVX, MKV, MPEG2, MPEG4, WMV |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 22 W |
| Sustainability certificates | ENERGY STAR |
| Consumer Electronics Control (CEC) | Anynet+ |
| Supported 3D technologies | FPR 3D |
| Audio output channels | 7.1 channels |
To Next Page
