Open or close the onscreen display (OSD) menu, or return to
the parent menu.
Open the HUB settings screen.
Conveniently establish a wireless connection Wireless
Connection and change the input source Select Source using
the HUB menu.
NOTE
To hide the HUB window, press the [ ] or [
] button.
Turn the power on or off.
The power indicator will be lit when the product is operating
normally.
NOTE
• For details on the power-saving function, refer to “Power-saving
Function” in the product specications.
• To reduce power consumption, it is best to remove the power cable
when not using the product for an extended period of time.
Conrm a menu selection.
If you press the [
] button when a menu screen is not
displayed, the input source will be changed.
Series 5: HDMI / USB / MHL
Series 7: HDMI / USB / Wireless Connection / MHL
NOTE
A message that shows the current input source will appear at the top
left corner of the screen each time you turn on the power or press the
[
] button to change the input source.
ICONS DESCRIPTION
Move to the upper or lower menu or adjust the value for an
option on the OSD menu.
Adjust the Brightness, Contrast using the [
] buttons when
the initial screen (that displays no menu screen) is displayed.
Move to the left or right menu or adjust the value for an
option on the OSD menu.
Adjust the Volume using the [
] buttons when the initial
screen (that displays no menu screen) is displayed.
To Next Page
Loading...
