21
Using Smart Station
Software Installation for Using
Smart Station
To use the product, install on your PC the software provided with the product.
When installing the software for the rst time, follow the "Automatic Installation" instructions.
To maximize the performance of the Smart Station monitor, visit www.samsung.com and
upgrade the driver periodically.
NOTE
Wireless Connection Manager is for Series 7 only.
Automatic installation when using a
notebook PC
1. After opening the package, connect the Smart Station monitor to your notebook PC using
the USB cable provided in the package.
USB
2. After the connection is established between the Smart Station monitor and PC using the
USB cable, the following software programs required to use the Wireless Connection, USB
Hub, and Mobile Control functions will automatically install.
(Wireless Connection Manager (for Series 7 only), USB Display Driver, Ethernet
Driver, Mobile Control)
NOTE
• Do not remove the cable or turn off the product until install is complete.
• Even if the USB cable is connected, the PC screen will not be displayed on the monitor until the
install is complete.
To Next Page
Loading...
