Samsung C24B750X

62
HUB
Congure the settings to use the HUB function on the product.
NOTE
To open the HUB menu screen, press the [ ] button on the stand.
Auto Wireless Detection - for Series 7 only
If a PC connects to the product via the wireless-connection dongle, the product will
automatically detect the wireless connection and change the input source to Wireless
Connection mode.
Enabling/disabling Auto Wireless Detection
1. Press [
m
] on the product.
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to HUB using the [ ] buttons. Next, press the [ ] button.
NOTE
To open the OSD menu where you can adjust the HUB settings, press the [ ] button on the stand.
4. Move to Auto Wireless Detection using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
Series 7
Return EnterAdjust
HUB
Auto Wireless Detection
USB Super Charging
Select Source
Wireless ID
:
:
:
:
한국어한국어
USB
H1A1000001
Off
On
• Off: Disable Auto Wireless Detection.
• On: Automatically change the input source to Wireless Connection mode if a wireless connection is
detected by the product.
5. Press [ ] to move to the option you want and press [ ].
6. The selected option will be applied.
NOTE
Auto Wireless Detection is supported on Series 7 only.
Setup and Reset
Chapter. 9