Samsung C24B750X - Configuring Volume in the Initial Screen; Configuring HUB in the Initial Screen

71
IN F ORMATI ON Menu a nd Othe r s
ConguringVolumeintheInitial
Screen
Adjust the Volume setting using the [ ] buttons in the initial screen (where no OSD menu is
displayed).
1. Press [ ] when the initial screen is displayed. The following screen will appear.
Volume
100
:
Exit EnterAdjust
2. Adjust the Volume setting using the [ ] buttons.
NOTE
The speaker function is available on Series 7 only. To listen to the sound on Series 5, connect an audio
output device (headphones, etc.).
ConguringHUBintheInitialScreen
Press the [ ] button on the stand when no OSD menu is displayed. The HUB menu window
will be displayed.
1. Press [ ] when the initial screen is displayed.
You can change the Auto Wireless Detection, USB Super Charging and Select Source
settings or view the Wireless ID.
2. Congure the settings as required using the [ ] buttons.
NOTE
• Refer to "HUB" for further details on how to use the HUB function.
• The Auto Wireless Detection and Wireless ID functions are supported on Series 7 only.