22
Using Smart Station
3. Automatic installation may not be supported depending on your PC system settings.
If automatic installation does not work, run Windows Explorer. Open My Computer –
Removable media device drive and check the software. Finally, double-click the software to
proceed with installation. Alternatively, install using the software program on the provided
CD.
• Install using Explorer
A virtual installation driver will appear. Double-click the icon to install the program.
NOTE
• It may take a while for the virtual driver to appear.
• Do not remove the cable or turn off the product until install is complete.
• Install using the CD
Run the provided CD, then select the desired language.
Click SAMSUNG Smart Station to install the program manually.
NOTE
• Loading the install le may take a while.
• Do not remove the cable or turn off the product until install is complete.
4. After installation, make the required connections and use the product as instructed below.
-
For Series 5 users
Press the [
] button on the front of the product to change Select Source to USB.
Alternatively, press the [
] button to change the input source to USB.
-
For Series 7 users: Disconnect the USB cable. Next, connect the wireless-connection
dongle to a USB port on the PC.
Press the [
] button on the front of the product to change Select Source to Wireless
Connection. Alternatively, press the [
] button to change the input source to Wireless
Connection.
NOTE
Wireless Connection is supported on Series 7 only.