Printing_ 107
5. Select the page order from the Page Order drop-down list, if necessary.
6. Click th
e Paper tab, select the Original size, Source, and Type.
7. Click OK or Print
until you exit the Print window.
Printing posters
This feature allows you to print a single-page document onto 4, 9, or 16
sheets of paper, for the purpose of pasting the sheets together to form one
poster-size document.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click th
e Basic tab, select Poster Printing in the Type drop-down list.
3. Select th
e page layout you want.
Specification of the page layout:
4. Select the Po
ster Overlap value. Specify Poster Overlap in millimeters
or inches by selecting the radio button on the upper right of Basic tab to
make it easier to paste the sheets together.
5. Click the Paper tab, select the Original size, Source, and Type.
6. Click OK or Print
until you exit the Print window.
7. You
can complete the poster by pasting the sheets together.
Printing on both sides of the paper
You can print on both sides of a paper; duplex. Before printing, decide how
you want your document oriented. You can only use this feature with Letter-,
Legal-, Oficio-, US Folio-, A4-, ISO B5-, JIS B5-, Statement-, Executive-,
A5-, 8K-, 16K-, Ledger- or JIS B4-sized paper.
Do not print on both sides of the special media, such as labels,
envelopes, or thick paper. It may cause a paper jam or damage the
machine.
1. To cha
nge the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click th
e Basic tab.
3. From th
e Double-Sided Printing section, select the binding option you
want.
• Printer Default: If you select this option, this feature is determined
by the setting yo
u’ve made on the control panel of the machine. This
option is available only when you use the PCL printer driver.
• None
: Disables this feature.
• Lo
ng Edge: This option is the conventional layout used in
bookbinding.
• Short Edge: This option is the conventional layout used in
calendars.
• Reverse Double-Sided Printing: Check this option to reverse the
print order when duplex printing.
4. Click the Paper tab, select the Original size, Source, and Type.
5. Click OK or Print until you exit th
e Print window.
Change the size of your document
You can change the size of a document to appear larger or smaller on the
printed page by typing in a percentage for reduction or enlargement.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Paper tab.
3. Se
lect the actual paper size of the originals from the Original Size.
4. En
ter the scaling rate in the Percentage input box.
You can also click the up/down arrows to select the scaling
rate.
You cannot use this feature when you select a size of paper from
the Output Size.
5. Select the Source and Type.
6. Click OK or Print until you exit th
e Print window.
Fitting your document to a selected paper size
This printer feature allows you to scale your print job to any selected paper
size regardless of the document size. This option can be useful when you
want to check fine details on a small document.
To Next Page
Loading...
