Introduction_ 33
Turning the machine on
Keep in mind that you should use the power cord supplied with the
machine. Otherwise, it can cause fire or damage to the machine.
1. Plug the power cord into the power receptacle.
2. Plug the other end into a properly grounded AC outlet.
3. Turn on the main power switch.
• Some parts inside of the machine may be hot when power is on, or
after printing. Be careful not to burn yourself when working inside
the machine.
• Do not disassemble the machine when it is turned on or plugged
in. Doing so may give you an electric shock.
To Next Page
Loading...
