Copying_ 62
Stamp
Prints the date and time, IP address, device information, and the entered
comment on printouts.
1. Press Copy from the display screen.
2. Place the orig
inals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust
the settings for each copy such as Paper Source, Duplex and
more in the Basic tab (see "Changing the settings for each copy" on
page 52).
4. Pr
ess the Advanced tab > Stamp from the display screen.
5. Check th
e button on the right.
6. Pre
ss the checkbox on the right.
• IP
Address: This option allows you to print a IP Address on the
printouts.
• ID: This option allows you to print a user ID on the printouts.
• D
evice information: This option allows you to print a device
information on the printouts.
• Comment: This option allows you to print your comment on the
prin
touts.
• Time & Date: This option allows you to print time and date stamps
on the printouts.
7. Pr
ess OK from the display screen.
8. Pr
ess Start on the control panel to begin copying.
Selecting the type of originals
The original type setting is used to improve copy quality by selecting
document types for current copy jobs.
1. Press Copy from the display screen.
2. Pl
ace the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Ad
just the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Pre
ss the Image tab > Original Type from the display screen.
5. Pre
ss the appropriate option.
• Text: Use for originals containing m
ostly text.
• Text/Photo
(Text & Printed Photo): Use for originals containing
text mixed with photographs.
• Photo: Use for photographs.
• Co
pied Original: Use for copied documents.
• Ma
p: Use for maps.
• L
ight Original: Use for light documents.
6. Pres
s Start on the control panel to begin copying.
Adjusting background
This feature is helpful when copying originals containing color in the
background, such as in newspapers or catalogs.
1. Press Copy from the display screen.
2. Pl
ace the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Ad
just the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Pre
ss the Image tab > Adjust Background.
5. Pre
ss the appropriate option.
• Off: Disables this feature.
• Auto: Optimizes the background.
• Enhance: The higher the number is, the more vivid the background.
• Erase
: The higher the number is, the lighter the background.
6. Pres
s Start on the control panel to begin copying.
To Next Page
Loading...
