Copying_ 63
Erasing backside Images
When the original is thin and backside images show through, you can use
this feature to remove the backside images.
1. Press Copy from the display screen.
2. Place the orig
inals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust
the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Pr
ess the Image tab > Erase Backside Image.
5. Pre
ss the appropriate option.
• Off: Disables this feature.
• Eras
e: The higher the number is, the lighter the backside image is.
6. Pr
ess Start on the control panel to begin copying.
To Next Page
Loading...
