Media and tray_ 42
want to set the paper size and type or if the machine cannot detect them,
you can set the size and type directly in the confirmation window.
• If you experience problems with paper feeding, check whether
the paper meets the media specifications (see "Print media
specifications" on page 165). Then, try placing one sheet at a
time in the multi-purpose tray (see "Multi-purpose tray" on
page 42).
• The settings made from the machine driver override the
settings on the control panel.
To print from an application:
a) Open an
application and start the print menu.
b) Open Printin
g Preferences (see "Opening printing
preferences" on page 101).
c) Press the Paper tab in Pr
inting Preferences, and select
an appropriate paper type, size, and source.
d) Press OK.
e) Start pri
nting from an application.
Multi-purpose tray
The multi-purpose tray can hold special sizes and types of print material,
such as postcards, note cards, and envelopes. It is useful for single page
printing on colored paper.
Tips on using the multi-purpose tray
• Load only one type, size, and weight of print media at a time in the
multi-purpose tray.
• To prevent paper jams, do not add paper while printing when there is
still paper in the multi-purpose tray. This also applies to other types
of print media.
• Print media should be loaded face down with the top edge going into
the multi-purpose tray first and be placed in the center of the tray.
• Always load only the specified print media to avoid paper jams and
print quality problems (see "Print media specifications" on page 165).
• Flatten any curl on postcards, envelopes, and labels before loading
them into the multi-purpose tray.
1. Ope
n the multi-purpose tray and pull out the extention if necessary.
2. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
To Next Page
Loading...
