Samsung digital SC-D363 - Selecting the OSD Language (Language)

ENGLISH
2727
✤ The Language function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes. ➥page 19
✤ You can select the desired language to display the menu screen and the messages.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY]. (SC-D363/D364/D365/D366 only)
3. Press the [MENU] button.
■
The menu list will appear.
4. Move the [Zoom] lever up or down to select <System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Language>, then press the [OK]
button.
■
The available language options are listed.
6. Move the [Zoom] lever up or down to select desired OSD language, then press the [OK]
button.
■
The OSD language is refreshed in the selected language.
7. To exit, press the [MENU] button.
[ Note ]
The word <Language> in the menu is always indicated in English.
Selecting the OSD Language (Language)
Initial Setting : System Menu Setting
Camera Mode
√System
Clock Set
Remote
Beep Sound
Language
Demonstration
√On
√On
√English
√On
Move Select Exit
MENUOKZOOM
4
1