ENGLISH
4343
Basic Recording
Using the LIGHT (SC-D362/D364/D365/D366 only)
✤ LIGHT function works only in <Camera> mode. ➥page 19
✤ The LIGHT enables you to record a subjects in dark places without sacrificing color.
✤ The LIGHT can be used with the COLOR NITE function only.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)
3. Press the [LIGHT] button until <Color N. 1/15 ( )> appears.
[ Notes ]
■
The LIGHT will not turn on or off while you are recording.
■
The range of the LIGHT is limited. (up to 6.6ft (2m))
[ Danger ]
■
The LIGHT can become extremely hot.
■
Do not touch it while in operation or soon after turning it off, otherwise serious injury may
result.
■
Do not place the Camcorder into the carrying case immediately after using the LIGHT,
since it remains extremely hot for some time.
■
Do not use near flammable or explosive materials.
60min
0:00:10
Color N. 1/15
SP
STBY
1
3
œ
To Next Page
Loading...
