3-5
Navigation Buttons
These are used to “navigate” through menus and features displayed on the LCD.
Menu Button
This button is used to display menus of information, such as outgoing and
incoming call logs, speed dial numbers, and directory dial numbers. It also allows
you to set and display features such as call forwarding and alarm reminder types.
Send Button
This button is used to answer calls through the speakerphone. If pressed when the
phone is idle, the button displays the most recent received number or recent called
number saved in memory. If pressed and held down, the last called outside number
is redialled.
End Button
This button terminates the current call or exits the menu mode display (see Menu
Button.).
Cancel Button
This button is used:
When moving to the previous step in the menu mode display.
To cancel the last character/digit while entering data in the display.
Enter Button
This button is used when selecting or saving a corresponding entry on the menu
mode display. It can also be used as the [NND (Name/Number Display)] button
when receiving calls. The [NND] button displays ‘caller number’, ‘caller name’,
and ‘received time’ in turn, as you press the button, for outside calls (if caller ID
information is available).
To Next Page
Loading...
