24
CREATE PROGRAMMED STATION
MESSAGES
Messages 1-10 are programmed from the factory and cannot be changed.
However, you can create 10 additional 16-character messages (11-20) that
fit your company’s needs. After programming these messages, inform other
employees so they can add the new messages to the list on the back of their
user guides.
PROGRAM KEYS
UP & DOWN - Select the message number.
KEYPAD - Used to enter characters.
Hold - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press Transfer and then dial 715 PGM.MESSAGE (01)
Display shows the first message IN A MEETING
2. Dial in the message number (e.g., 11) PGM.MESSAGE (11)
OR press UP or DOWN to scroll through _
the messages and press the right soft
key to move the cursor
3. Enter in the message using the PGM.MESSAGE (11)
procedure in Program Station Names
IN THE SHOWROOM
and press the right soft key to return
to step 2 above
4. Press Transfer to store and exit programming
OR press Speaker to store and advance to
the next program
23
6. Press the F key to access Program
Personal Speed Dial Numbers for
Other Stations OR press Transfer to
store and exit programming OR press
Speaker to store and advance to the
next program
To Next Page
Loading...
