3029
PROGRAMMING ACCOUNT CODES
This program is used to add or change account code entries.
PROGRAM KEYS
KEYPAD - Used to enter the account code (allowable digits 0ā9).
UP & DOWN - Used to select entry number.
Hold - Used to clear data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press Transfer and then dial 708 ACCOUNT CODE
Display shows (001)
2. Dial the account code entry (e.g., 005) ACCOUNT CODE
OR press UP or DOWN to select the (0
05)
entry number and press the right soft
key to move the cursor
3. Enter the account code via the dial pad, ACCOUNT CODE
e.g., 1234 (maximum of 12 digits) and (005)1
23456789012
press the right soft key to move the
cursor back to step 2
4. Press Transfer to store and exit pro-
gramming OR press Speaker to store and
advance to the next program
SETTING INDIVIDUAL FORWARD NO
ANSWER TIMERS
Each station can have an individual Call Forward No Answer timer to accom-
modate station users with different individual work habits. When adjusting
this timer, take care that the value is not greater than the transfer recall timer.
The range is 001-255 seconds.
PROGRAM KEYS
KEYPAD - Used to set timer values.
UP & DOWN - Used to select extension number.
Speaker - Save data and advance to next program.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 502 [2
01] NO ANS FWD
Display shows 010 SEC
2. Dial the station number (e.g., 205) OR [205] NO ANS FWD
press UP or DOWN key to select the 010 SEC
station and press the right soft key OR OR
press Redial to select all stations [ALL] N
O ANS FWD
and press the right soft key 010 SEC
3. Enter the new value via the dial pad, [205] NO ANS FWD
(e.g. 020), must be 3 digits) and the 010 SECā020
system will return to step 2
4. Press Transfer to store and exit
programming OR press Speaker to store
and advance to the next program
To Next Page
Loading...
