DS 616 USER INSTRUCTIONS
TECHNICAL MANUAL PART 1 JUNE 2004
1.14
1.12 SETTING STATION ON/OFF OPTIONS
The following options may be turned on and off at your keyset.
0. AUTO HOLD Automatically places an existing C.O. call on hold if the
CALL button, trunk key or trunk route key is pressed during
that call. This will not affect the Auto Hold part of transfer
and park/page.
1. AUTO TIMER Automatically starts the stopwatch timer immediately when a
C.O. call is answered or after a short delay on an outgoing
call.
2. HEADSET USE When on, this feature disables the hook switch, allowing a
headset user to answer all calls on the headset without
requiring to lift the handset.
3. HOT KEYPAD When on, this feature allows the user to dial directory
numbers without having to first lift the handset or press the
Speaker button.
4. KEY TONE Allows the user to hear a slight tone when pressing buttons
on the set.
5. PAGE REJOIN This feature allows keyset users to hear the remaining
portion of an ongoing internal page or all page over the
speaker of their keysets after they return their keysets to
idle. To enable this feature, follow the procedure below.
6. RING PREF. When off, this feature requires the user to press the fast
flashing button to answer a ringing call after lifting the
handset.
7. NOT CONT CID When enabled (set to ON), Caller ID information will not be
displayed on keyset for the duration of the call, but only for a
short period after the call is answered.
Note: When
disabled, it is suggested that the station auto timer be
disabled. This prevents display corruption.
8. AME PSWD If this option is set to YES, station users who have AME set
must enter their station password to listen to messages
being left.
To Next Page
Loading...
