2625
5. Enter the alarm type from the list above [205]ALM REM (2)
OR press UP or DOWN to select the HHMM:1300DAILY
alarm type and press the right soft key
to move the cursor
6. Enter the messages using the procedure [205]ALM REM (2)
in Program Station Names
and press the TAKE MEDICATION
right soft key to return to step 2
7. Press Transfer to store and exit pro-
gramming OR press Speaker to store
and advance to the next program
SET ALARM/APPOINTMENT
REMINDER WITH MESSAGE
Keyset users can set their own alarms but standard telephone users cannot.
The system administrator can set alarm/appointment reminders for other sta-
tions in the system.
ALARM TYPE
0 NOTSET
1 TODAY
2 DAILY
PROGRAM KEYS
UP & DOWN - Select a station.
Hold - Press to clear data.
KEYPAD - Used to enter data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press Transfer and then dial 116 [201
]ALM REM(1)
Display shows HHMM: NOTSET
2. Dial the station number (e.g., 205) OR [205
]ALM REM(1)
press UP or DOWN to select the station HHMM: NOTSET
and press the right soft key to move the OR
cursor OR press Redial to select all [ALL]ALM REM(1)
stations HHMM: NOTSET
3. Dial 1
–2 to select the alarm (e.g., 2) OR [201]ALM REM(2
)
press UP or DOWN to select the alarm HHMM: NOTSET
and press the right soft key to move the
cursor OR press the left soft key to
return to step 2
4. Enter the alarm time in 24 hour clock [205]ALM REM (2)
format (e.g., 1300) and the display will HHMM:1300NOTSET
automatically advance to step 5
To Next Page
Loading...
