DS 616 USER INSTRUCTIONS
TECHNICAL MANUAL PART 1 JUNE 2004
1.7
1.5 SETTING YOUR ANSWER MODE
Each keyset can have its answer mode for intercom calls set to one of the following
options:
RING—The station will ring in one of eight custom ring patterns. Calls are answered by
pressing the Speaker key or lifting the handset.
AUTO—After giving a short attention tone, the station will automatically answer calls on
the speakerphone. When a C.O. line is transferred to a station in Auto Answer, the
screened portion of the call will be Auto Answer, but the keyset will ring when the
transfer is complete if the user has not pressed the Speaker key or lifted the handset.
VOICE—The station will not ring. After a short attention tone, callers can make an
annoucement. The called party must press the Speaker key or lift the handset to reply.
ACTION DISPLAY
1. Press the Transfer key followed by 103
Display shows
[201] ANS MODE
RING MODE
2. Dial 0, 1 or 2 to change the ring mode, e.g., 2
OR
[201] ANS MODE
VOICE ANNOUNCE
Press UP or DOWN to select the ring mode
3. Press the Transfer key to store and exit
To Next Page
Loading...
