ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a
CID number received from the Central Office with a name programmed in
this translation table. If there is no match between a received number and a
name in this table, [no CID name] will be displayed. The translation table
consists of 200 entries with each entry comprised of a 12 digit telephone
number and a 16 digit name. See
Program Station Names.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
Hold - Used to clear previous entry.
ACTION DISPLAY
1. Press Transfer and then dial 728 CID XLAT:(001
)
Display shows first entry DIGIT:
2. Dial entry number (e.g., 005) CID XLAT:(005)
OR use UP and DOWN to scroll DIGIT:_
through entries and press right
soft key to select entry
3. Enter telephone number and press CID XLAT:(005)
right soft key to advance to name entry DIGIT:3054264100
OR enter telephone number and press
left soft key to return to step 2 above
4. Enter the name using the method CID XLAT:(005)
in Program Station Names SAMSUNG TELECOM
and press right or left soft key to
return to step 2 above
OR
press Speaker to save and advance
to next MMC
OR press Transfer to
save and exit programming
DEFAULT DATA: NONE
31
To Next Page
Loading...
