E-7
Selecting the Automatic Operating Mode
If necessary, press (ON/OFF) button.
Result: : ◆ The On/Off indicator on the function
controller comes on.
◆ The air conditioner runs in the mode
selected when the unit was last used.
1
In the Automatic mode, the room temperature and the
fan speed are controlled automatically.
To select the AUTO mode, press the Mode button until
is displayed at the top of the function controller.
Result:
: ◆ The air conditioner runs in AUTO mode.
2
The air conditioner is fitted with a
protection mechanism to prevent the unit
from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
IMPORTANT
◆ You can change modes at any time.
N
N
o
o
t
t
e
e
To adjust the temperature, press the Temperature buttons
one or more times until the required temperature is
displayed. Possible temperatures are between 18ºC and
30ºC inclusive.
Result:
◆ Each time you press Temperature buttons:
- The temperature is adjusted by 1ºC.
◆ The air conditioner starts cooling, provided
that the room temperature is than the
selected temperature.
- The quantity of air is adjusted automatically.
3
To Next Page
Loading...
Need help?
General
