1. To close the cover, attach the upper part of the back
cover as shown (1).
For more informatio
n on Memory Cards, see “Memory Card”
on page 38.
Removing the Memory Card
1. Push on the memory card until it clicks and is released.
2. Grasp the memory card and remove it from the phone.
Installing the Back Cover
Note:
Before closing the cover, check to see if there is any
foreign substance such as dust or sand between the
rubber on the back of the cover and the sealing area.
2. Ensure that all the hooks inside the cover (2) are
properly aligned an
d tightly closed.
3. To avoid water damage, ensure that the back cover is
completely closed by pressing just below the flash (3)
until you hear a click.
Getting Started 9
To Next Page
Loading...
