Headset Headset
Headset Headset
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so
that the other person cannot hear you.
Example:
You wish to say something to person in the room,
but do not want the person on the phone to hear
you.
To mute your phone during a call
1. Tap Mute .
The
Mute
button now appears as
Mute
and Mute is
activated.
Mute
2. Tap Mute
to deactivate the Mute function and
reactivate the microphone.
Bluetooth headset
1. Tap Headset .
2. The phone will scan for your Bluetooth headset. When
found, connect to the headset.
The
Headset
button now appears as and the
Bluetooth headset is activated.
Headset
3. Tap Headset to deactivate the Bluetooth headset
and reactivate the phone speaker.
Searching for a Number in Address Book
1. During the active call, press then tap
Contacts
.
2. Tap the Address Book entr
y.
For further details about the Address Book feat
ure, see
“Finding an Address Book Entry” on page 60.
Call waiting
The Call Waiting feature allows you to answer an incoming
call while you have a call in progress, if this service is
supported by the network, and you must first activate the
Call Waiting feature:
From the Home screen, tap
Call
settings
Additional settings
Call waiting
.
You are notified of an incoming call by a call waiting
tone.
Call forwarding
1. From the Home screen, tap
Call
settings
Additional settings
Call forwarding
.
2. Tap one of the following options:
• Always forward
: allows you to forward all voice calls.
Call Functions 55