Why did the TV SoundConnect (TV pairing) fail on my Samsung Speaker System?
If the TV SoundConnect (TV pairing) failed on your Samsung Speaker System, ensure your TV supports TV SoundConnect (available on some Samsung TVs released from 2012). Also, update your TV to the latest firmware. If an error occurs, contact the Samsung Call Centre. You can also reset TV SoundConnect and connect again by pressing and holding the p button for 5 seconds.
What to do if Samsung Speakers subwoofer drones and vibrates?
If the subwoofer on your Samsung Speakers drones and vibrates noticeably, adjust the subwoofer's volume level using the WOOFER button on your remote control. You can set the level between -12, -6, and +6.
Why is TV SoundConnect (TV pairing) failing on my Samsung Speakers?
If the TV SoundConnect (TV pairing) failed on your Samsung Speakers, ensure your TV supports TV SoundConnect (available on some Samsung TVs released from 2012). Update your TV's firmware to the latest version. To reset the TV SoundConnect connection, press and hold the p button for 5 seconds and connect again.
Why is my Samsung Speaker System remote control not working?
If the remote control for your Samsung Speaker System isn't working, first, try replacing the batteries with new ones. Also, ensure that you are not too far from the main unit; try moving closer.
Why is Samsung Subwoofer TV SoundConnect failing?
TV SoundConnect is supported by some Samsung TVs released from 2012. Check your TV to see if it supports TV SoundConnect. Ensure your TV has the latest firmware. If an error occurs, reset TV SoundConnect and connect again by pressing and holding the p button for 5 seconds. If the problem persists, contact the Samsung Call Center.
How to stop Samsung Speakers subwoofer from droning and vibrating?
If the subwoofer on your Samsung Speakers drones and vibrates noticeably, adjust the subwoofer's volume level using the WOOFER button on your remote control. You can set the level between -12, -6, and +6.
Why did TV SoundConnect (TV pairing) fail on my Samsung Speakers?
If the TV SoundConnect (TV pairing) failed on your Samsung Speakers, it could be due to several reasons. First, ensure that your TV supports TV SoundConnect, which is available on some Samsung TVs released from 2012 onwards. Next, update your TV to the latest firmware. If an error occurs during connection, reset TV SoundConnect and connect again by pressing and holding the p button for 5 seconds. If problems persist, contact the Samsung Call Centre.
How to fix Samsung Speakers when no sound is produced?
If your Samsung Speakers aren't producing any sound, make sure the Mute function is off by pressing the (Mute) button. Also, check that the volume isn't set to the minimum and adjust it accordingly.
What to do if a function does not work when the button is pressed on Samsung HW-J6501R?
If a function on your Samsung Speaker System doesn't work when you press the button, it may be due to static electricity. Disconnect the power plug and then reconnect it.
How to fix Samsung HW-J6501R when no sound is produced?
If your Samsung Speaker System isn't producing sound, ensure that the Mute function is off by pressing the (Mute) button. Also, check the volume level and increase it if it's set to minimum.
General| Channels | 6.1 |
|---|---|
| Total Power Output | 300W |
| Subwoofer Type | Wireless |
| Bluetooth | Yes |
| HDMI Inputs | 1 |
| Optical Input | 1 |
| Audio Decoding | Dolby Digital, DTS |
| Remote Control | Yes |
| Wall Mountable | Yes |
| Weight (Subwoofer) | 7.3 kg |
| Sound Modes | Music, Movie, Standard, Sports |
General safety warnings, hazard symbols, and their meanings for safe operation.
General safety warnings and detailed explanations of hazard symbols.
Details FCC regulations and key safety instructions for users.
Guidelines for operation, electrical safety, water, heat, plugs, and power cords.
Precautions for installation environment, AC power, and electrical hazards like thunderstorms.
Information on battery handling, chemical hazards, and safe disposal.
Explains primary remote control buttons like Source, Mute, Repeat, and Sound Control.
In-depth explanation of remote functions including sound modes and Anynet+.
Step-by-step process for attaching the wall mounting brackets securely.
Final steps for wall mounting and safety checks to prevent detachment.
Detailed steps for establishing an HDMI audio/video connection to your TV.
Connecting the TV wirelessly using Bluetooth (TV SoundConnect).
Step-by-step guide for pairing and connecting a Bluetooth-enabled device.
Addresses issues with power, function buttons, sound output, and remote control.
Addresses issues with power, sound, remote control, and connectivity.
Problems with TV connection, subwoofer linking, and vibration issues.
Steps for automatic and manual wireless connection between the subwoofer and main unit.
Step-by-step guide for establishing a wired TV connection using an optical cable.
Safety guidelines and preparation steps before installing the wall mount.
To Next Page
