Samsung INFUSE - Page 123

Connections 115
Connect to a Wi-Fi Network
1. From the Home screen, tap  Settings  Wireless
and network  Wi-Fi settings .
The network names and security settings (Open network or
Secured) of detected Wi-Fi networks are displayed in the
Wi-Fi networks section.
2. Tap the network you want to connect to.
Note: When you select an open network, you will be automatically connected
to the network.
3. Enter a wireless password if necessary.
Manually add your new network connection
1. Tap Add Wi-Fi network .
2. Enter the Network SSID . This is the name of your Wireless
Access Point.
3. Tap the Security field and select a security option. This must
match the current security setting on your target WAP.
4. If secured, you will also need to enter your WAP’s
password.
5. Tap Save to store the new information and connect to your
target WAP.
Note: The next time your device connects to a previously accessed or secured
wireless network, you are not prompted to enter the WAP key again,
unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap  Settings  Wireless
and network  Wi-Fi settings .
2. Tap the Wi-Fi field to deactivate the feature. The green
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap  Settings  Wireless
and network  Wi-Fi settings .
2. Press  Scanning.