6
2.
When charging is finished, remove the flat end from the
interface connector jack on the phone.
Warning!:
If your handset has a touch screen display, note that a touch screen
responds best to a light touch from the pad of your finger. Using
excessive force or a metallic object when pressing on the touch
screen may damage the tempered glass surface and void the
warranty. For more information, refer to “Warranty Information” on
page 147.
Note:
Failure to unplug the wall charger before you remove the battery can
damage the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon ( ) blinks and the device sounds a
warning tone at regular intervals. In this condition, your phone
conserves its remaining battery power by entering the dimming
mode. The battery charge indicator located in the upper-right
corner of your device’s display provides a quick check of the level.
Solid color ( ) indicates a full charge.
When the battery level becomes too low, the phone automatically
turns off.
Switching the Phone On or Off
1. Press and hold (on the upper right side of the
phone) until the phone switches on.
2. Sweep your finger across the screen to unlock the phone.
Note:
The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to
“Changing Your Settings” on page 85.
3. To switch off the phone, press and hold until the
Phone options
screen displays.
4. Tap
Power off
.
Locking and Unlocking the Touch Screen
1. Press to lock the touch screen.
2. Press again to display the main screen then sweep
your finger across the screen to unlock the touch screen.
Setting up your Phone
When you first turn on your phone, you will need to set up a few
things. Make selections on each of the following screens and
touch Next to move to the next screen, Finish to complete the
setup.
Note:
Sim card must be inserted to make a call. (see see “Installing the SIM
Card” on page 1.
To Next Page
Loading...
