Viewing the Menus
t, With the power on, press the MENU button.
The main menu appears on the screen. The menu' s left side has five icons:
Picture, Sound, Channel, Setup, input.
2, Use the A or '_ button to select one of the five icons.
Then press the ENTER button to access the icon's sub-menu.
3, Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "oft-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CH_ or CHQ button to scan through the channels. This eliminates the need to change
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
SetectincJ the Video Sienal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
t, Press the MENU button to display the menu.
Press the A or • button to select "Channel", then press the ENTER button.
2. Press the ENTER button select "Antenna".
Press the A or _r button to select "Air" or "Cable", then press the ENTER button.
Press the EXIT button to exit.
To Next Page
Loading...
