Viewing Closed Captions (On-Screen Text Messages) -Analog
The Analog Caption function operates in either analog TV channel mode or external signal mode.
(Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
t. Press the MENU button to display the menu.
Press the A or _' button to select "Setup"_then press the ENTER button.
2. Press the A or _' button to select "Caption'_then press the ENTER button.
3. Press the ENTER button to select "Caption'.
Press the A or _r button to select "On"_then press the ENTER button.
4. Press the A. or _r button to select "Caption Mode", then press the ENTER button.
Press the A or T button to select submenu (DefaulL CC1~CC4 or Textl~Text4)
you wanL the press the ENTER button.
Press the EXIT button to exit.
- The default is "CCl",
- CO1: The Primary S_qchronous CaPtionService. These are captions in me
primary language tna_mus_De n aync wtm me sound, preferably
matched [o a specific frame
• CC2: The Special Non-S! ncnronous Use CaD[ions.
This channe carries aata that is intended to augment information carried
n _neprogram.
• CC3: Secondary Synchronous Caption Service.
Alternate program-related caDuondata, typmally second language
captions.
• CC4: Spec_a_Non-S)_cnronousUse Captions.SimilartoCC2.
• Text1:C_rstTextService.Thismay De variousnon-programrelateddata.
• Text2:SeconaTextService.Additionalda_a.usuallyne_program_elatea
• Te×t31Text4:Thirdand FourthTextServices.
TheseGalachannelssnouJaDe usea on j fTextland Text2are
not sufficient.
> The Caption feature doesn't work in Component, HDMI or PC modes.
:_ The availability of captions depends on the program being broadcast.
[:_ Press the CAPTION button on the remote control to select "On" or" Off".
I I1
I It
To Next Page
Loading...
