Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
t. Press the MENU button to display the menu.
Press the A or V button to select "Channel"_then press the ENTER button.
2. Press the A or V button to select "Fine Tune"_then press the ENTER button.
3, Press the _ or I_ button to adjust the fine tuning.
To store the fine tuning setting in the TV's memory, press the ENTER button.
If you do not store the fine-tuned channel in memo% adjustments are not saved.
4. To reset the fine tuning setting, press the _' button to select "Reset"_
then press the ENTER button.
Press the EXIT button to exit.
"," will appear next to the name of fine-tuned channels.
>_ Only analog TV channels can be fine tuned.
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect
reception quality or you win not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however_adjust your antenna to improve the reception of available digital channels.
t. Press the MENU button to display the menu.
Press the A or V button to select "Channel"_then press the ENTER button.
2. Press the A or T button to select "Signal Strength", then press the ENTER
button.
If the signal strength meter indicates that the signal isweak, physically adjust your
antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest
signal.
Press the EXIT button to exit
To Next Page
Loading...
