Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen and a different one in the PIP screen, Please see 'PIP Settings' below for details. You can use the PIP
feature to simultaneously watch two video sources. (See page 37 to select the PIP picture sound,)
While V-Chip (See page 56) is in operation, the PIP function cannot be used.
While xvYCC (See page 27) is in operation, the PIP function cannot be used.
Activatin_l Picture-in-Picture
t. Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER button.
Press the A or T button to select "PIP", then press the ENTER button.
2. Press the ENTER button again.
Press theA or T button to select "On", then press the ENTER button.
If you turn the TV off while watching in PIP mode and turn it on again, the PIP
window will disappear.
:_ You can view Analog TV broadcasts on the PIP screen (sub-picture) when the
main picture is from an external device connected to HDMI1, 2, 3,
Component1, 2 or PC
Main picture Sub picture
Component 1, 2
HDMI 1,2, 3 Analog TV broadcasts only
PC
[_] Alternately, you can press the PIP button on the remote control repeatedly to activate
or
deactivate the PIP.
CAPTION /_
III
Chanc_the PIP Channel
3. Press the A or _r button to select "Channel', then press the ENTER button.
Press the h, or T button to select the desired channel in the PIP window.
Press the ENTER buttons.
MAIN: PC / HDMI 1,2,3 / Component 1,2
PIP: TV(Analog)
[_/ Alternatly, you can press the PIP Channel buttons on the remote control.
To Next Page
Loading...
