Samsung LN-T4071F - Picture and Sound Adjustments

Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory.
You can activate either Dynamic_Standard, Movie by making a selection from the menu.
t, Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select "Mode".
Press the A or T button to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
_'ChooseDynamicto increasetheCtarityand sharpnessofthepicture.
_'ChooseStandardforthe standardfactorysettings.
ChooseMoviefor anaturalimagewithoutpictureenhancements.
3, Press the A or V button to select "Contrast", "Brightness", "Sharpness",
"Color", "Tint(G/R)" or "Backlight", then press the ENTER button.
4. Press the 4 or I,_button to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the I,- button increases it.
Press the ENTER button.
Press the EXIT button to exit.
When you make changes to "Contrast", "Brightness", "Sharpness",
"Color", "Tint(G/R)" or "Backlight", the OSD will be adjusted accordingly.
:_ When in PC mode, TinL Sharpness and Color are not available.
:_ Each adjusted setting wilt be stored separately according to its input mode.
[_JPress the P.MODE button on the remote control repeatedly to select the desired
picture mode.
t2) L) L)
_MODE S,_ STILL P,SIZE