To Next PageTo Next PageHow do I stop horizontal bars from flickering on my Samsung LN-T5265F?
If horizontal bars appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
What to do if closed captioning is not working on Samsung LN-T5265F LCD TV?
If closed captioning is not working on your Samsung LCD TV and you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV.
What does 'Not Supported Mode' message mean on Samsung LN-T5265F LCD TV?
If you see a “Not Supported Mode” message on your Samsung LCD TV, check the maximum resolution and the frequency of the Video Adapter. Compare these values with the data in the Display Modes.
Why is my Samsung LCD TV image too light or too dark?
If the image on your Samsung LCD TV is too light or too dark, adjust the Brightness and Contrast. You can also try adjusting the Fine tuning.
What to do if my Samsung LN-T5265F LCD TV has no picture or sound?
If your Samsung LCD TV has no picture or sound, try the following: - Try another channel. - Press the SOURCE button. - Make sure the TV is plugged in. - Check the antenna connections.
What to do if the picture has a Red/Green or Pink tint on Samsung LN-T5265F?
If the picture on your Samsung LCD TV has a Red/Green or Pink tint, make sure the Component cables are connected to the correct jacks.
What to do if my Samsung LN-T5265F operates erratically?
If your Samsung LCD TV is operating erratically, unplug the TV for 30 seconds, then try operating it again.
What causes black bars on the screen of my Samsung LCD TV and how can I remove them?
Black bars on your Samsung LCD TV screen can appear if the broadcast you are watching is not High Definition (HD). To eliminate them, set your cable/satellite box to stretch or widescreen mode.
How to fix Samsung LCD TV remote control malfunctions?
If your Samsung LCD TV remote control is malfunctioning, try these steps: - Replace the remote control batteries. - Clean the upper edge of the remote control (transmission window). - Check the battery terminals.
Why is there no sound or very low sound on my Samsung LCD TV?
If there is no sound or the sound is too low on your Samsung LCD TV even at maximum volume, first check the volume of the devices connected to your TV, such as a digital broadcasting receiver, DVD player, cable broadcasting receiver, or VCR. Then, adjust the TV volume accordingly.
General| Screen Size | 52 inches |
|---|---|
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| HDMI Ports | 3 |
| Component Video Inputs | 2 |
| Composite Video Inputs | 2 |
| S-Video Inputs | 1 |
| PC Input | 1 (D-Sub) |
| RF Antenna Input | 1 |
| Optical Digital Audio Output | 1 |
| Resolution | 1920 x 1080 |
| Dynamic Contrast Ratio | 15000:1 |
| Audio Output | 10W x 2 |
| Viewing Angle | 178°/178° |
| Speakers | 2 |
| Tuner | ATSC/NTSC |
| Power Consumption (Standby) | 1W |
Advises on displaying still images to prevent screen damage.
Provides an overview of the TV's features and included accessories.
Instructions for connecting VHF and UHF antennas to the TV.
Basic TV power management and initial automatic setup process.
Specifies the antenna source (Air or Cable) before channel memorization.
Guides for programming the remote to control VCRs and cable boxes.
How to select preset picture modes like Dynamic, Standard, and Movie.
Adjusts screen color tone and resets picture settings to factory defaults.
Allows freezing a moving picture and optimizing for movie viewing.
Adjusts sound settings and selects preset sound modes.
Enables virtual surround sound and selects digital audio tracks.
Selects antenna input and clears scrambled digital channels.
Guides on setting up the TV as a computer monitor.
Step-by-step guide for manual clock setting.
How to set up a personal identification number (PIN) for V-Chip.
Overview of WISELINK menus and remote control functions.
How to connect Anynet+ compatible devices to the TV and home theater.
